Worx WG894E Safety And Operating Manual

8
Cordless Li-Ion handy saw
WG894E WG894E.5
WG894E.9
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
ASSEMBLY
REPLACING/INSERTING THE SAW BLADE
Remove the battery pack from the socket
before carrying out any adjustment, servicing or
maintenance.
When mounting the saw blade, wear protective
gloves. Danger of injury when touching the saw blade.
When changing the saw blade, take care that the saw
blade holder is free of material residue, e. g. wood or
metal shavings.
1. SELECTING A SAW BLADE (See Fig. A)
NOTE: Only use maximum blade lengths specified in
table below for the intended purpose of application,
Failure to adhere to this advice will result in damage to
the product and void of warranty.
Typical application
Pruning blade (152mm,
6TPI, 65Mn)
GARDEN LIMBS, ETC.
Bi metal blade (152mm,
18TPI, HSS)
METALS AND WOOD
,ETC.
2. INSERTING A SAW BLADE (See Fig. B)
Remove the battery pack from the socket
before carrying out any adjustment, servicing or
maintenance.
Pull down the tool-free blade clamp lever (6), Insert the
blade shank into the blade holder until it stops. Release
the clamp lever (6) to lock the blade (7/8) in position.
Check the tight seating of the saw blade. A loose
saw blade can fall out and lead to injuries.
3. REMOVING A SAW BLADE (See Fig. B)
To remove a blade, depress the clamp lever, pull out
the blade.
CHARGING
WARNING: The charger and battery pack
are specially designed to work together so
do not attempt to use any other devices. Never
insert or allow metallic objects into your charger
or battery pack connections because of an
electrical failure and hazard will occur.
Your battery pack is UNCHARGED and you must charge
1
2
1
2’
2
6
9
B
C
D
A
F1
F2
E

Worx WG894E Specifications

General

Brand	Worx
Model	WG894E
Category	Saw
Language	English