Why does my Worx WR165E Lawn Mower vibrate?
If your Worx Lawn Mower is vibrating, the blade disc may be unbalanced, or the blades may be damaged. Inspect the blades and replace them if necessary. Also, remove any debris or foreign objects from the blades and blade disc.
What to do if Worx WR165E Lawn Mower operative system crashes?
If the Worx Landroid operative system crashes when charging or on standby, it may be due to a software or display fault. Restart Landroid.
What to do if Worx WR165E does not charge?
If your Worx Lawn Mower isn't charging, check that the power cord is properly connected to the charger and the charger is connected to a suitable power supply. Also, ensure both charging strips on the mower touch the center of the contact strips on the charging pile.
General| Battery Voltage | 20 V |
|---|---|
| Battery Capacity | 2.0 Ah |
| Power Source | Battery |
| Cutting Height Adjustment | Central |
| Cutting System | Rotary Blade |
Read all warnings and instructions carefully. Failure to comply may result in injury.
Never operate with defective guards, keep hands/feet away from blades, avoid bad weather.
Switch off power for maintenance, keep fasteners tight, inspect weekly, use correct charger.
Do not dismantle, short-circuit, or expose battery to heat. Handle leaks safely.
Read manual before use. Keep safe distance. Do not ride on machine.
Lists common error messages and their initial troubleshooting steps.
To Next Page
