Rev 2.2/12-21 P1-02DC3: #351221
SPECIFICATIONS .....................................................................................3
SAFETY...................................................................................................5
OPERATING FEATURES............................................................................6
ASSEMBLY..............................................................................................7
INTENDED USE .......................................................................................9
L
OAD CHARACTERISTICS.................................................................................9
O
PERATING ENVIRONMENT..........................................................................10
D
ISPOSAL OF THE LIFTER .............................................................................10
OPERATION..........................................................................................11
B
EFORE USING THE LIFTER...........................................................................11
Taking Safety Precautions .................................................................................................11
Selecting a Screen Language.............................................................................................11
Performing Inspections and Tests .....................................................................................12
Checking the 12-Volt Battery ............................................................................................12
Preparing to Use the Remote Control System ..................................................................13
TO ATTACH THE PADS TO A LOAD ..................................................................14
Positioning the Lifter on the Load.....................................................................................14
Powering up the Lifter ......................................................................................................15
Sealing the Pads on the Load............................................................................................15
Reading the Vacuum Gauges ............................................................................................16
TO LIFT AND MOVE THE LOAD .....................................................................17
Interpreting the Lift Light..................................................................................................17
Monitoring Vacuum Indicators .........................................................................................17
Controlling the Lifter and Load .........................................................................................18
In Case of a Power Failure.................................................................................................18
TO ROTATE THE LOAD .................................................................................19
T
O TILT THE LOAD ......................................................................................20
T
O RELEASE THE PADS FROM THE LOAD .........................................................21
AFTER USING THE LIFTER.............................................................................22
Storing the Lifter ...............................................................................................................23
Transporting the Lifter ......................................................................................................23
INSPECTIONS AND TESTS......................................................................24
I
NSPECTION SCHEDULE ................................................................................24
TABLE OF CONTENTS
To Next Page
Loading...