wsm wg972-e4 - Page 57

GENERAL
WG972-E4, WSM
G-31
Bushing Replacing Tool
Application
• Use to press out and to press fit the bushing.
[For small end bushing]
[For idle gear bushing]
9Y1211108GEG0010US0
Flywheel Stopper
Application
• Use to loosen and tighten the flywheel screw.
9Y1211108GEG0011US0
A 145 mm (5.71 in.)
B 20 mm (0.79 in.)
C 100 mm (3.94 in.)
D 19.90 to 19.95 mm dia. (0.7835 to 0.7854 in. dia.)
E 21.90 to 21.95 mm dia. (0.8622 to 0.8641 in. dia.)
F 25 mm dia. (0.98 in. dia.)
a 6.3 µm (250 µin.)
b 6.3 µm (250 µin.)
A 150 mm (5.91 in.)
B 20 mm (0.79 in.)
C 100 mm (3.94 in.)
D 19.90 to 19.95 mm dia. (0.7835 to 0.7854 in. dia.)
E 21.90 to 21.95 mm dia. (0.8622 to 0.8641 in. dia.)
F 25 mm dia. (0.98 in. dia.)
a 6.3 µm (250 µin.)
b 6.3 µm (250 µin.)
A 20 mm (0.79 in.)
B 15 mm (0.59 in.)
C 10 mm dia. (0.39 in. dia.)
D 30 mm (1.2 in.)
E 80 mm (3.1 in.)
F 8 mm (0.3 in.)
G 120 mm (4.72 in.)
KiSC issued 07, 2015 A