wtw pH 3110 - Measuring the Ph Value

pH 3110 Operation
17
ba75791e02 11/2008
Note
When calibrating without temperature sensor, also set the current
temperature of each buffer solution manually with the <▲><▼> keys.
4.2.1 Measuring the pH value
1 Perform the preparatory activities according to section 4.2.
2 Immerse the pH combination electrode in the test sample.
3 Using <M>, scroll as necessary until the measured parameter
pH is displayed.
4 Wait for a stable measured value.
The AR display indicator flashes as long as the measured
value is not yet stable.
8
4
2
2
9
9
6
pH
°
C
TP
AR