Turb 2000 Series Replacement parts and accessories
40 ba75695e03 10/2013
11 Replacement parts and accessories
Here you find the recommended accessories and spare parts that can be ordered from WTW.
If for any reason technical assistance is needed regarding this instrument please do not hesitate to
contact the WTW technical services department.
Accessory Model WTW order no.
Calibration kit for Turb 2000, Turb 2020, Turb 2100 and
Turb 2120:
primary standards 0.02 -10.0 -1000 NTU,cleaning tissues
and indexing rings
Kal Kit Turb/DW 600 052
Calibration kit for Turb 2110:
primary standards 0.02 -1.0 -10.0 NTU, cleaning tissues and
indexing rings
ProCal-Kit 600 056
RS-485 communication cable AK485-Turb/DW 600 042
Ultrasound flow through cuvette for Turb 2020 and 2120 FTC US-Turb/DW 600 047
Flow through cuvettes (3 pieces) for Turb 2000 and 2100 FTC 3-Turb/DW 600 046
Desiccant pack DP-Turb/DW 600 048
Flow through assembly, Nylon (rotational quick release flow
head), without cuvette/tubes
DF-Turb/DW 600 050
Tubing kit (tubes, fittings, clamp, backpressure valve, drain
vent)
Tub Kit-Turb/DW 600 049
Connection set. Scope of delivery: 3 m PU-hose, 2 quick
disconnect couplers for PU-hose with ¼” NPT female screw
thread
A-Set-DW 600 060
Stilling / bubble chamber BC-Turb/DW 600 041
Power supply unit, 24 V DC PS 24V-Turb/DW 600 044
Wide range power supply unit, 100 ... 240 V AC, 47/63 Hz PS-Turb/DW 600 045
To Next Page
Loading...
Need help?
General
