FLEXCOMM 2000
(P-2000/C-2000/RT-2000)
Installation Manual
Page 12 of 56 Publication No. 150-049106
P-2000 Installation Manual Rev. F
Nov 2007
***XTS-3000 CPS software is required for transceiver frequency band options 1-4. Option 5 and 6
require XTS-5000 CPS software. Contact Motorola for part number and purchasing information.
Motorola Software must be obtained by the operator directly from Motorola Customer Service
Department via the following telephone numbers:
U.S. and Canadian Customer 1-800-422-4210
Outside U.S. Customer 1-847-538-8023
DB-15/25 Crimp Tool, Positronics P/N 9507 (M22520/2-01)
DB- 15/25 Crimp Positioner, Positronics P/N 9502-5
DB-15/25 Insertion/Removal Tool, Positronics (M81969/1-02)
RF Connector Crimp Tool (For "TNC" Style Connectors) AMP CTL- I
Die Set for Tool 227-944 (For "TNC" Style Connectors): AMP 227-1221-11
RF Connector Crimp Tool (For "BNC" Style Connectors) AMP CTL- I
Die Set for Tool 227-944 (For "BNC" Style Connectors): AMP 227-122 1 -11
RF Connector Crimp Tool (For "N" Style Connectors) AMP CTL-3
Die Set for Tool 227-944 (For "N" Style Connectors): AMP 227-1221-57
These commodities, technology or software are controlled in accordance with the United States Export Administration Regulations, Export Classification
Control Number (ECCN) 7E994. When exporting, diversion contrary to U.S. law is prohibited.
To Next Page
Loading...
