67
5. Transport and Storage
Upon delivery, the motors must be checked for visible transport damage.
If the motor shows visible damage, it must not be put into
operation. The vibration motor must be returned to the
manufacturer for examination and, if necessary, repair.
The vibrator motors must be stored in closed, dry rooms at ambient
temperatures of -20 ° C to a maximum of + 60 ° C until they are installed.
Vibration motors may only be placed on their feet.
The motor must not be lifted by the attached connection
cable.
The eye bolts of sizes HV 65 and HV 85 are only to be used to lift the vibration
motor.
The local accident regulations must be observed.
To Next Page
Loading...