EasyManua.ls Logo

Xantrex 3000

Xantrex 3000
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C–1
C Alternators and Charging
Systems
A good charging system is important for the health of your batteries. Poor
recharging methods can quickly damage batteries.
Appendix C provides guidelines for recharging batteries from an
alternator, from AC power, and from alternate energy sources.
Charging System Requirements
Your charging system should be capable of delivering a charging current
equal to 25% of the amp-hour capacity of your battery. For example, if
you have a 200 Ah battery, the charging system should be able to deliver
50 A. The charging system must also be able to charge each 12 V battery
up to approximately 14.4 V and then drop back to a “float” voltage of
13.5–14 V (or shut off).
CAUTION
Never operate the inverter directly from an alternator. To work properly, the
inverter must be connected to a battery or a well-regulated, high-current DC
power supply.
XPower3000.book Page 1 Wednesday, December 10, 2003 6:52 AM

Table of Contents

Related product manuals