Introducing the Link 1000
2
Introducing the Link 1000
The Link 1000 gives you complete remote control of the
Freedom 458, Freedom, and Freedom Marine Inverter/
Chargers. It also lets you monitor the performance of your
battery power system.
Inverter/Charger Control Functions
From the Link 1000 control panel, you can:
• Turn the invert function on and off
• Start or end an equalization cycle
• Activate the Power Share feature. This automatically
lowers the charger’s output to prevent AC breakers from
tripping if too many loads come on at once.
• Place the inverter/charger in Idle (standby) mode so it
only begins inverting at a level that you choose. This
power-saving feature minimizes the draw on your battery
by turning the inverter off until it’s really needed.
• Make custom settings for numerous functions including
battery type, battery capacity, and Power Share mode.
These let you set up the Link 1000 so it suits the
characteristics of your system.
• Lock your setup values so no one can inadvertently
change them
Monitoring Functions
The Link 1000 control panel lets you see:
• The battery’s state-of-charge at a glance
• The voltage of the battery being monitored and the
voltage of a second (starting) battery
• The flow of current into the battery (charge rate)
• The flow of current out of the battery (consumption rate)
• The number of Ah (Amp-hours) that have been
consumed
To Next Page
Loading...
Need help?
General
