What to do if Xantrex Xanbus System Control Panel displays 'Internal failure. Service required'?
If the Xantrex Control Panel shows 'Internal failure. Service required', it means that the silicon serial ID number has failed and the SCP has gone into Standby mode. Reset the SCP by removing and restoring network power. If the problem persists, call customer service.
What does 'Memory failure. Service required' mean on Xantrex Xanbus System Control Panel?
If the Xantrex Control Panel displays 'Memory failure. Service required', it means that the SCP has suffered a non- volatile memory failure. Reset the SCP by removing and restoring network power. If the problem persists, call customer service.
How to troubleshoot 'Internal failure. See guide' on Xantrex Xanbus System?
If the Xantrex Control Panel displays 'Internal failure. See guide' because a controller fault has occurred and the SCP has gone into Standby mode, reset the SCP by removing and restoring network power. If the problem persists, disconnect and reconnect network cables.
What to do if Xantrex Control Panel lost network connection?
If your Xantrex Control Panel loses network connection due to a faulty connection or electronic signal disruption, check the connection between the SCP and the network.
Why does my Xantrex Control Panel say 'SCP has fixed a memory problem, restored defaults'?
If the Xantrex Control Panel encounters an internal memory problem upon startup and restores its default settings, acknowledge the warning and reset configurable settings if necessary.
How to fix 'The value failed to change. Try again' on Xantrex Xanbus System Control Panel?
If the value failed to change on your Xantrex Control Panel because a Xanbus-enabled device rejected the new setting or due to a temporary communication problem, check the device operation guide and settings. The setting may be out of range, the system mode may be incorrect, or another device setting is overriding the setting you want to change. Try changing the value again.
What does 'Internal reset. Call customer support' mean on my Xantrex Control Panel?
If the Xantrex Control Panel displays 'Internal reset. Call customer support' it means that the real-time clock in the SCP has failed. Reset the SCP by removing and restoring network power. If the problem persists, call customer service.
What to do if Xantrex Xanbus System says 'A device is lost. Check connection'?
If the Xantrex Control Panel shows 'A device is lost. Check connection' because the SCP has lost communications with another device on the network, check the network connection between the SCP and the device.
Why does my Xantrex Control Panel say 'New device detected. Check device settings'?
If the Xantrex Control Panel displays 'New device detected. Check device settings' because you have connected a new device to the network or reconnected a disconnected device, acknowledge the message and check that the device is properly configured.
How to resolve 'Device instance is duplicated' error on Xantrex Xanbus System Control Panel?
If the Xantrex Control Panel displays 'Device instance is duplicated' because two networked devices of the same type have the same instance, select a different instance ID on one of the devices’ Setup menu.
The main control unit for the Xanbus system.
Contact phone number for support.
Contact fax number for support.
Company website for information.
Indicates severe hazard, death, or serious injury.
Indicates potential for death or serious injury.
Indicates potential for minor or moderate injury.
Warning about installing in flammable areas.
Warning about unauthorized modifications voiding authority.
Overview of SCP's role in system monitoring and configuration.
Describes the SCP as part of Xantrex's network protocol.
Lists benefits of Xanbus network products like ease of use and reliability.
Describes the sine wave inverter/charger for various applications.
Describes the integrated power management system for RVs.
Explains the AGS function for automatic generator start/stop.
Details the SCP's display, lights, and buttons.
Illustrates network connections between system components.
Guidelines for selecting an appropriate installation site for the SCP.
Lists necessary items for SCP installation.
Warning against installing in hazardous locations.
Warning about using incorrect cables causing equipment damage.
Warning about routing cables with power cabling.
Warning about connecting to unauthorized devices or creating loops.
Warning about checking for obstructions before cutting into a wall.
Warning about providing adequate space for cables to prevent damage.
Explains the function of each button on the SCP for navigation and configuration.
Warning about advanced settings for qualified personnel.
Explains system modes affecting SCP and device behavior.
Steps to switch between Operating and Standby modes.
Explains conditions that trigger warnings and recommended actions.
Details electrical parameters like voltage, current, and protocol.
Lists operating and storage temperature and humidity ranges.
Lists safety and EMC certifications.
Provides contact information and procedures for obtaining warranty service.
General| Manufacturer | Xantrex |
|---|---|
| Category | Control Panel |
| Display Type | LCD |
| Communication Protocol | Xanbus |
| Compatible Devices | Xantrex inverters, chargers, and other Xanbus-enabled devices |
| Mounting | Flush mount |
| Compatibility | Xanbus-enabled devices |
To Next Page
