USB Cable Extension - 6 Foot
CAB-00517
$3.95
Favorited Favorite 1
Wish List
The Dongle still shares all of the features of its sibling -- reset button, LEDs, voltage regulator, and breadboard-compatible pin breakouts.
XBee Explorer Serial
Computers with an RS-232 serial port are becoming harder and harder to find, but if you do have one of those relics, the XBee Explorer
Serial is a viable option.
The Serial Explorer has a bigger footprint than its USB-based brethren, but still shares most of the same features. There are RX and TX
LEDs, reset button, break-out pins, and a voltage regulator. One additional feature that the Serial Explorer has is an On/Off switch on
board. This enables the user to turn on or off the power supply to the XBee module.
One additional feature available on the Serial Explorer are two jumpers available near the DB9 connector. These allow the user to swap
the configuration of the DB9 connector to work with either a straight through cable (DCE configuration), or a switched cable (DTE
configuration). If you’re using our Serial Cable, the default DCE configuration of the jumpers is fine.
To Next Page
Loading...
Need help?
General