XBee S1 - Serial Cable DB9 M;F - 6 Foot; Wall Adapter Power Supply - 9 VDC 650 mA; Wall Adapter Power Supply - 12 VDC 600 mA; Wall Adapter Power Supply - 5 V DC 2 A (Barrel Jack)

Serial Cable DB9 M/F - 6 Foot
CAB-00065
$4.25
Favorited Favorite 4
Wish List
The Serial Explorer does require an external power supply. It has a barrel jack connector which will work with our 12V, 9V, or 5V wall
adapters. Make sure the selected power supply can source enough current for the XBee you are using.
Wall Adapter Power Supply - 9VDC 650mA
TOL-00298
12 Retired
Favorited Favorite 23
Wish List
Wall Adapter Power Supply - 12VDC 600mA
TOL-09442
13 Retired
Favorited Favorite 15
Wish List
Wall Adapter Power Supply - 5V DC 2A (Barrel Jack)
TOL-12889
16 Retired
Favorited Favorite 19
Wish List
Heads up! If you're using an Arduino, another option available is the XBee Shield. That's a subject for another tutorial. Let's focus on
Page 7 of 24