X16 Installation Guide
- 52 - Issue 2
System Setup
Holiday Mode – When set to On, the system
will play a special holiday OGM. If set to Off,
the system will follow the standard day/night
or weekend schedule.
Holiday Start – This is the time that the
system will begin playing the recorded
Holiday outgoing greeting.
Holiday End – This is the time that the
system will stop playing the recorded Holiday
outgoing greeting.
Holiday OGM – This is the greeting that will
play during the Holiday mode. If this greeting
is not recorded and Holiday Mode is set to
On, the system will play the default system
night greeting.
Weekend Mode
On/Off
Weekend Start
Fri, 06:00 PM
Weekend End
Mon, 09:00 AM
Weekend OGM
Play/Record
Issue 2 - 21 -
2 CO Line
Expansion Module
2 CO Line Expansion Module
The X16 system comes with four CO Lines, and can be expanded to six CO
Lines, when the 2 CO Line expansion module is installed.
The expansion module is located inside the communication server and connects
to the main board, via ribbon cable. After it is installed, and the system is
powered on, the expansion module will be recognized in software and become
fully operational. Use the following steps to install the expansion module.
Step 1 – Installing the Expansion Module
Place the voice server face down on a stable surface such as a table, showing
the four rubber feet.
Remove the four rubber feet, placing them in a safe place, such as the back of
the voice server, exposing 4 screws. Unscrew the four screws and remove the
cover.
2 CO Line Expansion Module
Phili
To Next Page
Loading...
Need help?
General
