Xblue Networks X16 Installation Guide

X16 Installation Guide
- 8 - Issue 2
Notes:
to radio frequency interference (RFI) or electromagnetic interference (EMI), it will be fixed at the
owners’ expense.
FCC Information
Provide the following information to the Telephone Company prior to connection the X16 system to the
network.
Item Specification
FCC Registration D6XKH05BX16
Ringer Equivalence 0.5B
Networks Address Signaling E
Service Order Code 9.0Y
Facility Interface Code 02LS2
Required Network Interface RJ11 & RJ14
Notes:
Issue 2 - 65 -
Voice Mail
Operation
Remote Commands
Mailboxes may be accessed from outside of the system using a telephone with
standard DTMF (Touchtone
®
) dialing.
Remote Access
Call into the system and let the Auto Attendant answer the call and then dial the
desired extension number. If the extension is forwarded to voicemail, and the
mailbox answers, enter the “Remote Access code” (default remote access code is
123) which is programmed in the “Phone Programming Area”.
Once connected remotely, the system will prompt the user through the remote
control menu.
1
Replay Previous Message
2
Play All New Messages
2# Play All Messages
3
Skip to Next Message
4
Record Memo
5
Stop
6
Play Personal OGM
7
8
9
Repeat this Menu
**
** - Erase Playing
Message
0
Transfer to Auto
Attendant
#

Xblue Networks X16 Specifications

General

Brand	Xblue Networks
Model	X16
Category	Telephone
Language	English