oice Mail
Operation
Use the up or down navigation buttons to scroll through the programming
choices, Press the center navigation button to select the “VoiceMail Setup”
parameter.
Use the up or down navigation buttons to scroll through the programming
choices, Press the center navigation button to select the “Personal OGM”
parameter.
Press the center navigation button to select “Play” to listen to the current
message.
To change the message use the down navigation button to scroll to
”Re-Record“ and press the center navigation button, and lift the handset to
begin recording.
Press the center navigation button again to “Stop” the recording, and preview
the newly recorded message.
Hang up the handset to accept the new message or select “Re-Record” to
rerecord the Outgoing Message.
AUTO MUTE
ÆPersonal OGM
Clear My VMSG
Issue 2 - 9 -
Introduction
Introduction
The X16 system is a full featured, next generation, multi-line business
telephone system ideal for both a home and small office environments. It
comes equipped to interface with 4 Central Office (CO) Lines, with caller ID
and Call Waiting Caller ID, and sixteen (16) X16 digital telephone endpoints.
The system can be expanded to accommodate two (2) additional CO Lines,
allowing for a maximum configuration of six CO Lines. In addition, the
system comes standard with Auto Attendant and all X16 digital telephone
endpoints have a personal digitally integrated voice mailbox.
Features
Auto Attendant (Standard) Intercom Callin
To Next Page
Loading...
Need help?
General
