XEMEX SCC-1 - Viewing Real-Time Current Measurements; How to View Phase Current Readings; Checking Device Software Versions; Procedure for Checking Software Versions

8.2 Current measurements
Thisscreendisplaysthecurrentmeasurements(inAmperes).Themeasuredcurrentsarevisibleinrealme(i.e.anupdateevery
second).
8.3 Soware versions
ThisscreenshowstheSowareversions.
www.xemex.eu    InstallaonManualSmartChargeController  pg18
SCC-1 HOME
CHANGE
mode:
ECO
1.Fromthehomescreen,pressunlyou
GettotheCurrentMeasurementsscreen.
4.6 A
CURRENTS
OK
SCC-1
L1:
8.2 A
L2:
5.8 A
L3:
2.Thecurrentmeasurementsaredisplayed.
PressOKtoreturntothehomescreen.
Press ortonavigatetoaprevious/next
menuscreen.
SCC-1 HOME
CHANGE
mode:
ECO
FW VERSIONS
OK
V1.0
SCC-1
Main CPU:
V1.0
Meas. sys:
1.Fromthehomescreen,pressunlyou
gettotheFWversionsscreen.
2.TheSowareversionsaredisplayed.
PressOKtoreturntothehomescreen.
Press ortonavigatetoaprevious/next
menuscreen.
www.xemex.eu    InstallaonManualSmartChargeController  pg19
8.4 Sengs
Thisscreendisplaysalistofsengs.
SCC-1 HOME
CHANGE
mode:
ECO
1.Fromthehomescreen,pressunl
you
gettotheSengscreen.
phases
SETTINGSSCC-1
OK
Number of
3
SETTINGS
list settings
Press OK to
SCC-1
OK
phases
SETTINGSSCC-1
OK
Number of
3
2.PressOKtodisplaythelist
withsengs.
3.Press ortonavigatetoaprevi-
ous/nextseng.Seebelowforthelist
ofsengs.
4.PressOKtoreturntothehome
screen.
32
OK
current
Max charge
SETTINGSSCC-1
OK
Metering
CT
SCC-1
device
SETTINGS
OK
CT ratio
2000
SCC-1 SETTINGS
IP adress
SETTINGSSCC-1
OK
192.168.9.101
Modbus
SETTINGS
502
SCC-1
OK
TCP port
SETTINGSSCC-1
OK
OK
Emulated meter
SCC-1
EMU Pro TCP
SETTINGS
6
OK
current
Min charge
SETTINGSSCC-1
Wifi SSID
xmx_iot