Xerox 128 - Page 21

DocuTech 128/155/180 HighLight Color Operator Guide 2-3
System components
Data formats supported
The Xerox DocuTech 128/155/180 HLC can print the following
data formats:
• ASCII
• LCDS*
• IPDS*
• PCL
• PDF
•PostScript
•TIFF
• PPML
NOTE: * Not supported on the Production publisher configuration
at this time.
The system prints LCDS data from a mainframe host computer,
emulating an IBM 4245 or 3211 page printer. The printing system
can receive data over a channel through bus and tag cables, and
through the Socket Gateway or lpr using TCP/IP protocol.
The system also prints PostScript and PCL data submitted over a
network (Ethernet or AppleTalk) from a variety of clients:
• PCs (Windows and Windows NT)
• Sun workstations (UNIX)
• UNIX command line clients: lpr (including lp) and Xerox
Command Line Client (CLC)
• NetWare Q-Server through a Novell print server (bindery
mode only)
• Apple Macintosh workstations
Table 1. Data stream resolution
Data stream Input resolution
Print resolution: DP128/155/180 HLC
LCDS 300 by 300 dpi 600 x 2400 dpi (High volume printer only)
PostScript and PCL 300 by 300 dpi or 600
by 600 dpi
600 x 2400 dpi (High volume printer)
600 x 600 dpi (Production publisher)