3-34 DocuTech 128/155/180 HighLight Color Operator Guide
Routine maintenance
Cleaning the sensors and the reflecting surfaces
CAUTION: Never use abrasive materials or strong solvents when
cleaning sensors.
The following is a list of sensors to clean:
• Q850 and Q861 sensor
• Q1011/1009 sensor and mirror
• High Capacity Feeder/Stacker configuration
• Q1106 sensor
• Q1166 sensor
• Q1107 sensor
• Q1164 sensor
• Production publisher configuration (finisher sensors)
• Q1201 sensor
• Q1202 and Q1203 sensors
• Q1205, Q1206, and Q1207 sensors
• Q1213 sensor
• Q1221, Q1218, and Q1227 sensors
• Q1222 and Q1210 sensors
Cleaning the Q850 and Q861 sensor
1. Open the right and left doors of the printer and locate Area 4.
2. Raise the Area 4 green handle until it locks into place.
To Next Page