DocuTech 128/155/180 HighLight Color Operator Guide 3-15
Routine maintenance
3. Remove the empty container by grasping its handle. With a
slow, firm motion, remove the container.
Figure 3-11 Highlight color container
4. Pull the container out until it stops.
5. Remove the container and discard it.
6. To insert a new bottle, place the bottle on the edge of the bottle
guide. With a slow, firm motion, push the bottle into the
dispense position over the hopper.
7. After the bottle is in the dispense position, remove the seal.
You may encounter some resistance.
8. Close the processor door.
To Next Page
Loading...
