Xerox 4110

Xerox 4590 EPS/4110 EPS System Administration Guide
1-6
1. Overview
Changing the Power Saver mode time interval
To set and activate the Power Saver feature, refer to the Auto
Power Saver section of Chapter 5.
Exiting the Power Saver mode
The machine exits Power Saver mode when one of the following
occurs:
• The user presses the Power Saver button on the Control
Panel
• The machine is in the process of receiving print data
To exit the Power Saver mode at the machine:
1. Press the Power Saver button on the Control Panel.
Power Saver
button