Xerox 4110

Xerox 4590 EPS/4110 EPS System Administration Guide 1-3
1. Overview
Power on/off
Switch the power on before operating the machine. After the
power is on, the machine will take about 5 minutes to warm up
before you can start printing.
Turn the machine off at the end of the day or when it is not in use
for a long period of time. Use the Power Saving feature when the
machine is not in use for a while to reduce power consumption.
CAUTION: Switching the machine power off may cause loss of
data being processed.
Refer to the Power Saver mode section that follows for more
information.
NOTE: If the power is off, all functions of the machine will stop.
Powering on
1. Open the power switch cover and press the power switch to
the [
|] position to turn the power on.
NOTE: The “Please wait...” message indicates that the machine is
warming up. The machine cannot be used while it is warming up.