Xerox 4110 System Administration Guide

Xerox 4590 EPS/4110 EPS System Administration Guide
4-2
4. Setups
System settings procedure
This section describes the basic procedure for changing system
settings. To make or change the system settings, it is necessary to
be in System Administration mode and use the System Settings
screen.
1. Enter the System Administration Mode by pressing the Log
In/Out button.
2. Using the numeric keypad, enter the System Administrator
UserID and password. (You may also select Keyboard to
display a keypad screen and enter the user ID and password
from there.)
NOTE: The default UserID value is 11111.
KEY POINT: It is recommended that you change the System
Administrator UserID and password immediately after
installing the machine. For information about the setting, refer
to “System Administrator settings” in this chapter.
Log In/Out
button

Xerox 4110 Specifications

General

Brand	Xerox
Model	4110
Category	Printer
Language	English