Xerox 4590 EPS/4110 EPS System Administration Guide
4-11
4. Setups
Time
Set the time in the system clock of the machine, using 12-hour or
24-hour representation. The time set here is printed on lists and
reports.
1. From the Machine Clock/Timers screen, select Time, and
select Change Settings.
2. Select the display format.
3. When 12 Hour Clock is selected, select AM or PM.
4. Set the minutes and hours by using the , , or the numeric
keypad to enter a numeric quantity.
5. Select Save to save the settings and return to the previous
window.
To Next Page
Loading...
