Xerox 4110

Xerox 4590 EPS/4110 EPS System Administration Guide
4-16
4. Setups
Auto print
Set the time from the end of the print job until the execution of the
next print job. Set the value from 1 to 240 seconds, in one second
increments.
If you select Off, once the machine is ready, printing can start
immediately.
1. From the Machine Clock/Timers screen, select Auto Print,
and select Change Settings.
2. Select Off or On.
3. If you selected On, set the wait-to-print time by using the ,
, or the numeric keypad to enter a numeric quantity.
4. Select Save to save the settings and return to the previous
window.