Xerox 4110

Xerox 4590 EPS/4110 EPS System Administration Guide
4-28
4. Setups
7. Select the desired Paper Type for this specific tray. For this
procedure, Tray 4 is shown.
NOTE: Select to display the previous screen and select to
display the next screen.
8. Select Save to save the Paper Type and return to the previous
screen.
9. Select Save to return to the Paper Tray Attribute screen and
select a different tray.
10.Set the attributes for other trays as desired.
11.Select Close to return to the Paper Tray Settings screen.