Xerox 4110 System Administration Guide

Xerox 4590 EPS/4110 EPS System Administration Guide
4-39
4. Setups
Offset stacking (finisher tray)
Select the default offset stacking option for the finishing tray:
• None: If this option is selected, the finishing tray will not offset
any output.
• Offset per set: If this option is selected, the finishing tray will
offset each set of a print job. This option also offsets each job.
• Offset per job: If this option is selected, the finishing tray will
deliver all the sets of a job in one stack. When the next job
starts, that job is offset from the previous job in the tray. This
option does not offset each set of a job.
.
Default print paper size
Select the default paper size that will be used when printing a
report/list. Select between A4, or 8.5 × 11 inch.
3 sets of another job
3 sets
of a
job
3 sets of a job
Job 1
Job 2
(with stacked sets)
(with stacked sets)

Xerox 4110 Specifications

General

Brand	Xerox
Model	4110
Category	Printer
Language	English