Backup/restore/migrate tools 2-1
2
Machine setup
Prerequisites
Before you can use either the Backup Tool for restore document or the Migration Tool
applications, you must ensure that the following prerequisites are met:
• Obtain and record the client’s computer IP address
• Obtain and record the machine’s IP address/DNS host name
• Ensure that specific machine settings are enabled
• Register the client’s IP address on the machine
Tip
The User Interface (UI) screens shown in this document may or may not reflect the screens
displayed on your system or on your personal computer. The UI screens vary
from system to
system, computer to computer, and from marketplace to marketplace. Therefore, the UI
screens in this document show examples of the type of screens that may be seen on your
particular system/computer.
Obtain the computer IP address
1. Ensure that the client’s computer is started and running.
2. From the client’s computer, select Start > Control Panel > Network Connections.
3. From Network Connections, double-click on the Local Area Connections.
To Next Page
Loading...
Need help?
General
