Handling the Printer
Xerox 8254E / 8264E Color Wide Format Printer
User Guide
4-76
b. Press the [Enter] key. This saves the setting and "Set4: Side Margin" is again displayed in the control
panel.
c. Press the [Cancel] key several times. "Ready to Print" displays in the control panel.
3. Load the roll media.
Setting Roll Media
4. Set the media holder plates by sliding them from both sides of the platen.
Note:
• Do not use the media holder plates for media whose thickness is 400μm (0.4mm) or
greater. The media holder plate may interfere with the print head.
To Next Page
Loading...
