8254E / 8264E User Guide 4-82
Platen Heater Menu
Allows you to set up the Platen Heater temperature to warm up ink and improve print quality. This
control is active during printing operation.
Note:
• The preset temperature of the Platen Heater varies, depending on the media. For the
preset temperature of the Platen Heater, contact your local Xerox Sales Representative
for a recommended media list.
1. Follow the procedure below to make changes to the Platen Heater settings:
a. With "Ready to Print" displayed, press the [Menu] key. "Setup >" displays in the control panel.
Setup Item Setting Description
Pre-Heater Off / <30° C> to 50° C Sets up the Pre-Heater temperature.
1. Roll media
2. Pre-Heater
3. Print head
—
Pressing the [Enter] key saves the setting and shifts to the
previous menu.
Pressing the [Cancel] key cancels the setting and shifts to
the previous menu.
User media menu
To Next Page
Loading...
Need help?
General
