How to correct the printing position on my Xerox 8264E Printer?
If the printing position is incorrect on your Xerox Printer, ensure the media is loaded correctly. Cancel or reset the origin and print position settings.
What to do if the media slips or is torn during initialization of my Xerox 8264E?
If the media slips or is torn during initialization with your Xerox Printer, use recommended media and ensure it is loaded correctly. For 8264E models, ensure the roll media is set correctly; for 8254E models, ensure the scroller is set correctly. Clean the pressurizing roller and only use the printer in the specified environment. Replace any folded, torn, or rolled media. If the media bends, use recommended media and set the Vacuum Fan menu.
What to do if ink does not come out after ink replenishment in Xerox 8264E Printer?
If ink does not come out after ink replenishment in your Xerox Printer, leave the ink cartridge at room temperature for at least three hours if it was cold or frozen, and perform head cleaning several times. Also, ensure the power is turned ON during ink replenishment. If normal printing cannot be performed after ink replenishment, perform head cleaning several times.
Why Xerox 8264E Printer cannot perform ink replenishment?
If your Xerox Printer cannot perform ink replenishment, ensure the front cover is closed, the media loading lever is lowered, and, for 8264E models, the maintenance cover is closed. Also, ensure all four ink cartridges are fully inserted.
What to do if an error occurs when sending data to my Xerox Printer?
If data is sent from the computer and an error occurs at the Xerox Printer, ensure that the printer type settings on both the computer and printer are the same.
What to do if Xerox 8264E Printer does not work after loading the media?
If your Xerox Printer isn't working after loading the media, ensure that the front cover and any maintenance covers (8264E only) are closed, and the media loading lever is lowered. Check that the media is loaded straight, the ink cartridge is inserted, you're using recommended media, and the printer is used in the specified environment.
Why are parts of images missing when printing with Xerox 8264E?
To address missing parts of images when printing with your Xerox Printer, verify that the image size accounts for the side margins. Adjust the media width in the RIP settings to compensate for these margins, ensuring the entire image fits within the printable area.
How to fix images cut off on the left side on Xerox 8264E?
To resolve images being cut off on the left side with your Xerox Printer, ensure the image size sent to the printer accounts for the default margins. You can also specify a smaller media width in the RIP settings to compensate for these margins.
How to fix white or black lines on prints from my Xerox 8264E?
If white or black lines, banding, or waves appear on printed media from your Xerox Printer, ensure you are using recommended media. For 8264E models, check that the roll media is set correctly; for 8254E models, verify the scroller setting. Perform head cleaning, alignment, and media feed compensation. Ensure each heater is set to the correct temperature, and the head height is set to "Normal (Low)".
How to fix blurred printing on my Xerox Printer?
If your Xerox Printer is printing blurred images, ensure you are using recommended media. Also, confirm that the media is set on the correct printing surface. Additionally, perform Alignment and Media feed compensation. Check if each heater is set to the appropriate temperature and the head height is set to "Normal (Low)".
Covers power cable connection, turning the printer on/off, and long-term storage.
Addresses installation problems, ink issues, and general printing failures.
Solves print quality issues, error messages, status displays, and restart errors.
Provides detailed steps for clearing media jams from the printer.
Covers replacing ink cartridges, roll media, and flushing-box sponges.
Details cleaning the outer case, inside, print head, wiper, and around the cap.
To Next Page
General