XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction 10
Optional Stacker 1000
The Xerox Stacker 1000 is an optional finishing device which may be used
with the XES Synergix 8825/8830/8850 printer or the XES Synergix
8825/8830/8850 Digital Solution. The illustration shows the Xerox Stacker
1000 with an XES Synergix 8830 printer.
The Xerox Stacker 1000 stacks a maximum of 1000 prints of various sizes.
Print sizes include A (A4) through E (A0).
Ideal for use with the XES Synergix 8855 Printer or XES Synergix 8855
Digital Solution, the stacking capacity of the Optional Xerox Stacker is 500
E size bond prints.
Figure 6. Xerox Stacker 1000
Tray
extensions
(for longer-
size prints)
Media storage
compartment
(one on each side
of stacker)
Figure 7. Optional Xerox Stacker
To Next Page
Loading...
