Xerox 8850 System Introduction

XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction 25
Quick Start for Plot Nesting
Plot Nesting efficiently groups the printing of multiple images onto a single
piece of media to eliminate media waste. Plot nesting parameters can be set
with the AccXES Client Tools, with the Web Printer Manager Tool, or with the
XES Synergix 8825/8830/8850 Printer Control Panel as described in this
section.
Setting Nesting Parameters with
AccXES Client Tools
• Open the AccXES Client Tools by selecting the icon, or by selecting
Start> Program Files> AccXES.
• On the Document Submit screen, add documents to create a document
set, using the Add toolbar button.
• Select the Job Options toolbar button.
• Select the Composition tab.
• Set Plot nesting to “Single Job” The Controller will automatically nest
(group) your submitted documents, in a row, onto a single piece of
media. Selecting “Default” will use the printer’s plot nesting default.
• Select the Device Manager Tab and select the Destination Device.
• Go back to the Document Submit tab and select the Print Document Set
button. The documents will all print out on the same piece of media.

Xerox 8850 Specifications

General

Brand	Xerox
Model	8850
Category	Printer
Language	English