Xerox 8850 System Introduction

XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction 52
Printed Error Code Description What To Do About Printed Error Code
21080300 No results available from Floppy Disk Controller for Sense Interrupt
command.
Call for Service.
210F0100 No response from Floppy Disk Controller to Seek command.
Call for Service.
210F0200 Floppy Disk Controller timed out executing Seek command.
Call for Service.
210F0400 Floppy Disk Drive seek did not complete.
Call for Service.
210F0500 Floppy Disk Drive seek failed.
Call for Service.
21C50100 No response from Floppy Disk Controller to Write Data command.
Call for Service.
21C50300 No results available from Floppy Disk Controller for Write command.
Call for Service.
21C50500 Wrong track found during Write command.
Call for Service.
21C50600 Floppy Disk Controller reported Write command was invalid.
Call for Service.
21C50700 Bad disk found during Write command.
Call for Service.
21C50800 Data FIFO under run during Write command.
Call for Service.
21C50900 Sector not found on disk during Write command.
Call for Service.
21C50A00 Data CRC error detected during Write command.
Call for Service.
21C50B00 Address Field CRC error detected during Write command.
Call for Service.
21C50C00 Data Field missing during Write command.
Call for Service.

Xerox 8850 Specifications

General

Brand	Xerox
Model	8850
Category	Printer
Language	English