XES Synergix 8825/8830/8850/8855 & X2-TECH System Introduction 75
Print and Copy Job Rendering and Output
Long Plot Print: Maximum of 80 feet in length.
Copy: Maximum of 100 feet in length
Multiple Copies Print: 1 to 999, Copy: 1 to 999
Electronic Collation Printer only: at least 12 E size page sets @ 64 MB (Assumes 10:1 compression rate.)
Copier/printer/scanner: 200 “typical” E size pages @ 64 MB w/ 4.5G HDD. (Note: that a system with a 1GB HDD running
PostScript may achieve less than 100 E size page sets. This is a marginal configuration.)
Finisher Support Generic Finisher Interface Folder.
Print Engine Interface 8830 - Xerox P193R
8855 Family - Kip interface 8 rev G
Accounting Standard for 8830/8850. Optional feature key for 8825. Available for print, copy and scan jobs. Accounting of media use is
accomplished with the AccXES Account Management Tool running on a networked client workstation.
User Interface
User Parameter Setup Up to 10 User Setups (printer parameter & processing defaults sets).
Printer Control Panel Interface 8825/8830/8850 – Status LEDs, simple keyboard, 2x40 character-based LCD.
AccXES Controller Interface 8825/8830/8850 – See Printer Control Panel Interface or Web PMT.
Copier Front Panel Interface Status LEDs, simple keyboard, 64x256 pixel graphical LCD, located on top of scanner.
Remote Configuration Yes via HP PJL and Web PMT (Printer Manager Tool)
Localization Printer UI and Copier UI: English, French, Italian, Spanish, German, South American Portuguese
To Next Page
Loading...
Need help?
General