Fax Regulations
UUnniitteedd SSttaatteess
FFaaxx SSeenndd HHeeaaddeerr RReeqquuiirreemmeennttss
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer
or other electronic device, including a fax machine, to send any message unless such message clearly
contains in a margin at the top or bottom of each transmitted page or on the first page of the
transmission, the date and time it is sent and an identification of the business or other entity, or
other individual sending the message and the telephone number of the sending machine or such
business, other entity, or individual. The telephone number provided may not be a 900 number or any
other number for which charges exceed local or long-distance transmission charges.
For instructions on programming the Fax Send Header information, refer to the section of the System
Administrator Guide on Setting Transmission Defaults.
DDaattaa CCoouupplleerr IInnffoorrmmaattiioonn
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the
Administrative Council for Terminal Attachments (ACTA). On the cover of this equipment is a label
that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If
requested, this number must be provided to the Telephone Company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug are provided with this product. The product connects to a
compatible modular jack that is also compliant. Refer to installation instructions for details.
You can connect the printer safely to the following standard modular jack: USOC RJ-11C using the
compliant telephone line cord with modular plugs provided with the installation kit. Refer to the
installation instructions for details.
The Ringer Equivalence Number (REN) is used to determine the number of devices that can be
connected to a telephone line. Excessive RENs on a telephone line can result in the devices not ringing
in response to an incoming call. In most but not all areas, the sum of RENs does not exceed five (5.0).
To be certain of the number of devices that can be connected to a line, as determined by the RENs,
contact the local Telephone Company. For products approved after July 23, 2001, the REN is part of
the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the
REN without a decimal point, for example, 03 is a REN of 0.3. For earlier products, the REN is shown
separately on the label.
To order the correct service from the local Telephone Company, you could also have to quote the
codes in the following list:
• Facility Interface Code (FIC) = 02LS2
• Service Order Code (SOC) = 9.0Y
Caution: Ask your local Telephone Company for the modular jack type installed on your line.
Connecting this printer to an unauthorized jack can damage the telephone company
equipment. You, not Xerox, assume all responsibility and liability for any damage caused by the
connection of this printer to an unauthorized jack.
380
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Regulatory Information
To Next Page
Loading...
Need help?
General
