Xerox COLORQUBE 8570 User Guide

Printing
ColorQube 8570/8870 Color Printer
User Guide
60
To load paper in Tray 2, 3, 4, or 5:
1. Remove the tray from the printer.
2. Expand the paper guides if necessary to accommodate the size of the paper to be used.
Note: The paper guides detect the size of the paper based on where they are positioned in the
tray. This is important because some settings require that the paper in the tray match the size and
type selected on the control panel. Also, if Automatically Select is set in the printer driver’s Paper
field, the printer needs to detect what paper size it contains in its trays so it can match the right
paper to the incoming job.
• Length guide: Press the sides of the guide as shown and slide the guide until the arrow on the
guide points to the appropriate paper size imprinted on the bottom of the tray. When
properly positioned, the guide clicks into place.
• Width guides: Slide the width guides until the arrows on the guides point to the appropriate
paper size labeled on the bottom of the tray. When properly positioned, the guides click into
place.
8X70-002
8X70-029

Xerox COLORQUBE 8570 Specifications

General

Print Technology	Solid Ink
Monthly Duty Cycle	Up to 85, 000 pages
First Page Out Time (Color)	As fast as 5 seconds
First Page Out Time (B&W)	As fast as 5 seconds
Memory (Maximum)	1 GB
Output Capacity	350 sheets
Supported Operating Systems	Windows, Mac OS, Linux
Print Speed	Up to 40 ppm color / 40 ppm black
Connectivity	USB 2.0, Ethernet
Print Languages	PCL 6, PostScript 3, PDF