Printing
ColorQube 8570/8870 Color Printer
User Guide
96
The following paper and media cannot be used for manual 2-sided printing:
• Transparencies
•Envelopes
•Labels
• Coated/glossy paper
• Media of weights greater than 120 g/m
2
(32 lb.)
See also:
Supported Paper Sizes and Weights on page 55
Printing Side One
1. Load paper in Tray 1. Insert side one facedown with the top of the page entering the printer first.
2. On the printer control panel, select the paper size and type.
3. In the printer driver, select the options for paper size and paper type and then print side one to
Tray 1.
Printing Side Two
1. Remove the paper from the output tray and reload it in Tray 1 with side two facedown with the
top of the page entering the printer first.
2. On the printer control panel, do the following:
a. Select Change setup and then press the OK button.
b. At the Tray 1 Paper Size menu, select the paper size and then press OK.
c. At the Tray 1 Paper Type menu, select 2nd Side > OK.
3. In the printer driver, do the following:
Windows:
a. In Paper/Output tab, click the arrow to the right of the Paper summary section and select
Other Type and then select 2nd Side.
b. Click OK.
Macintosh:
a. From the pull-down menu, select Xerox Features.
b. From the next pull-down menu, select Paper/Output.
c. From the Paper summary menu, select Other Type and then select 2nd Side.
4. Send the print job.
To Next Page
Loading...
Need help?
General
