Xerox D110

10 Xerox
®
D95/D110/D125 Copier/Printer Security Function Supplementary Guide
Change the System Administrator’s
Passcode
1. Select [Authentication/Security Settings] on the [Tools] screen.
2. Select [System Administrator Settings].
3. Select [System Administrator’s Passcode].
4. Select [New Passcode].
5. Enter a new passcode of 9 or more characters using the keyboard displayed, and then
select [Save].
6. Select [Retype Passcode].
7. Enter the same passcode, and then select [Save].
8. Select [Save].
9. A confirmation window appears. Select [Yes] to confirm your entry.
Set Maximum Login Attempts
1. Select [Authentication/Security Settings] on the [Tools] screen.
2. Select [Authentication].
3. Select [Maximum Login Attempts By System Administrator].
4. On the [Maximum Login Attempts] screen, select [Limit Attempts].
5. With [▲] and [▼], set [5].
6. Select [Save].
Set Service Representative Restricted
Operation
1. Select [System Settings] on the [Tools] screen.
2. Select [Common Service Settings].
3. Select [Other Settings].
4. On the [Other Settings] screen, select [Service Rep. Restricted Operation].
5. Select [Change Settings].
6. Select [On].
7. Select [Maintenance Passcode].
8. Select [New Passcode].
9. Enter a new passcode of 9 or more characters by using the keyboard displayed, and then
select [Save].
10. Select [Save].