Xerox
®
D95/D110/D125 Copier/Printer Security Function Supplementary Guide
55
Error Code Cause and Remedy
016-586 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature
because lock folder deletion was not successful on the FTP server after connection.
[Remedy] Take one of the following actions:
Check the access privilege to the FTP server.
If any lock directory (.LCK ) exists in the forwarding destination, delete it manually, then
retry executing the job.
016-587 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature
because folder deletion was not successful on the FTP server after connection.
[Remedy] Check the access privilege to the FTP server.
016-588 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature
because the data could not be written in the FTP server after connection.
[Remedy] Check if enough space is available in the save location.
016-589 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature
because the data could not be read from the FTP server after connection.
[Remedy] Check the access privilege to the FTP server.
016-593 [Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature
because an internal error occurred after connection to the FTP server.
[Remedy] Try again. If the error persists, contact our Customer Support Center.
016-594
016-595
016-596
[Cause] The machine failed to transfer data using [FTP] of the [Scan to PC] feature
because a network error occurred.
[Remedy] Try again. If the error persists, contact our Customer Support Center.
016-703 [Cause] The machine received e-mail which specified an invalid folder number.
[Remedy] For errors occurring during e-mail reception:
Take one of the following measures:
Register the specified folder number, and request the sender to send the e-mail again.
Request the sender to send to an available folder.
If the error still is not resolved, contact our Customer Support Center.
016-704 [Cause] The folder is full, and hard disk capacity is insufficient.
[Remedy] Delete unnecessary files from the folder, and save the file.
016-705 [Cause] Secure print documents cannot be registered because of hard disk malfunction.
[Remedy]Contact the Customer Support Center.
Refer to Secure Print.
016-706 [Cause] The hard disk space is insufficient because the number of Secure Print users
exceeded the maximum limit.
[Remedy] Delete unnecessary files from the machine, and delete unnecessary Secure
Print users.
016-711 [Cause] The upper limit for the e-mail size has been exceeded.
[Remedy] Take one of the following measures, and then try sending the mail again.
Reduce the number of pages of the document.
Lower the resolution with [Resolution].
Reduce the magnification with [Reduce/Enlarge].
Ask your system administrator to increase the value set for [Maximum Total Data Size].
For color scanning, set [MRC High Compression] to [On] under [File Format].
016-713 [Cause] The passcode entered does not match the passcode set on the folder.
[Remedy] Enter the correct passcode.
016-714 [Cause] The specified folder does not exist.
[Remedy] Create a new folder or specify an existing folder.
To Next Page
Loading...
Need help?
General
