Xerox DocuColor 1632

2–112
U
SER
G
UIDE
(P
RINT
)
Printing Sample Print Jobs
After setting and sending the Sample Print job at the workstation,
execute the print instruction at the printer to print out the data.
NOTE: You can also check or delete print jobs saved in the
machine using the same procedure of executing print instruction
at the printer.
At the Workstation
This procedure uses Notepad of Windows 98 as an example. The
procedure is the same when using other operating systems.
1
Select Print from the File menu.
2
Select the Printer icon, then select Properties.
3
Select Printing Preferences on the General tab.
4
Select the Output Settings tab.
5
Select Secured Print from the Job Type drop-down list box.
6
From Stored Document Name in Secure Print Settings, select
either Enter Document Name or Auto Retrieve.
7
Select OK.
8
Select OK on the Output Settings tab to start the Sample Print.