Xerox DocuMate 510 User Manual

Scanning with the TWAIN Interface from PaperPort
102 DocuMate 510 Scanner User’s Guide
4. Click Yes then click Next.
The next window offers you the option to run hardware
diagnostics.
5. Click Yes (recommended) then click Next.
The next window is for checking the connection between your
scanner and the computer.
6. Click Next.
After the Setup Wizard checks the connections, the next
window is displayed. It has a series of setup options, but only
the Basic scan test is necessary because your scanner was
already tested and calibrated when you installed the One
Touch 4.0 software.

Xerox DocuMate 510 Specifications

General

Brand	Xerox
Model	DocuMate 510
Category	Scanner
Language	English