DocuMate 510 Scanner User’s Guide 65
Scanning
Scan and Burn to a CD
If you have a CD burner attached to your computer, you can scan
directly from your scanner onto a CD. This feature is available only
on computers running Windows XP or Windows Vista.
To scan and burn to a CD:
1. Put a blank CD into your computer’s CD Drive.
2. Open the One Touch Properties window.
3. Using the arrows, choose a button to use for scanning and
burning to a CD.
4. Select Burn to CD as the Destination Application.
The Burn to CD Destination Application is only available if you
have a CD burner attached to your computer, but you do not
need to have a CD in the burner to select the destination.
5. Choose a Page Format and a Scan Configuration.
6. Click OK.
The One Touch Properties window closes.
7. Now start scanning using the button you selected to use to
scan and burn to CD.
When scanning is finished, a bubble message on the screen
tells you that files are waiting to be burned to the CD.
8. Open the One Touch window and make sure that the Burn to
CD Destination Application is still selected and click the
Properties button.
To Next Page
Loading...
Need help?
General