Xerox DocuMate 510 - Step 2: Install the Software

Welcome
4 DocuMate 510 Scanner User’s Guide
What You Need
IBM-compatible Pentium 4 PC, or AMD equivalent with:
• A CD-ROM drive
• An available Universal Serial Bus (USB) port
•Microsoft
®
Windows
®
operating system: Windows 2000
(Service Pack 4), Windows XP (Service Pack 1 and 2), or
Windows Vista
• Windows 2000 and XP: Minimum of 512 megabytes (MB) of
internal memory (RAM)
Windows Vista: Minimum of 1 gigabyte (GB) of internal memory
(RAM)
• 350 MB minimum of free hard disk space
A VGA or SVGA Monitor
The recommended settings for your monitor are:
• High Color (16-bit) or True Color (24-bit or 32-bit)
• Resolution set to at least 800 x 600 pixels
To set your monitor’s colors and resolution:
• Open the Windows Control Panel
• Double-click on Display then select the Settings tab
Documentation
Your scanner is delivered with the following documentation:
• Quick Install Guide—Abbreviated installation instructions.
• Xerox DocuMate 510 Scanner User’s Guide—On the
Installation CD; contains detailed installation, scanning,
configuration, and maintenance information.
• PaperPort User’s Guide—On the Installation CD; contains
detailed feature and configuration information for the PaperPort
software.
• Online Help—For the scanner configuration, TWAIN and WIA
interfaces, and PaperPort software application.