DocuMate 510 Scanner User’s Guide 83
Scanning with the TWAIN Interface from PaperPort
The Folders pane is replaced by the Scan pane.
3. If no scanner is shown on the Scan Pane, the Available
Scanners window opens. If a scanner already listed in the
Scan Pane, but you want to choose another one, click Select
to open the window.
4. Select TWAIN: Xerox DocuMate 510.
The WIA: Xerox DocuMate 510 option is for using the WIA
interface.
5. Click OK.
A Confirm Selection message box opens.
6. Click OK on the message box.
Scan pane.
If this Scan button is not active when you select a scanner, see the section
on page 100 to set up PaperPort to work with your scanner.
Click Select to see the
available scanners.
To Next Page
Loading...
