3-8
DocuPrint P8ex Reference Guide
Loading Envelopes
Depending on the thickness of your envelopes, the multipurpose
paper feeder can hold up to 10 envelopes. If you experience
envelope feeding problems, try placing envelopes one at a time into
the manual feeder. It is also recommended that you use the face-up
stacker, as described in the section “Using the Face-up Stacker”
(page 3-7).
1
Insert the envelopes in the multipurpose paper feeder. The
envelopes should be loaded vertically with the face to be printed
toward the front, and the top edge of the envelope on the left.
2
Adjust the paper guides to the width of the envelopes.
3
Select the correct envelope size from your software application and
start your print job.
To Next Page
Loading...
Need help?
General