Xerox M20/M20i - Sending to a Mailbox

Page 6-18 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
Fax
Sending to a Mailbox
1
! Press the [Menu/Exit] key.
! Using the Navigation Keys select
[Mailbox] and press [Enter].
Enter
Menu/Exit
2
! Select [Send] and press [Enter]
Mailbox
[Send]
3
! Enter the box number for where
the originals are to be sent, and
press [Enter].
! Enter the passcode for the
mailbox and press [Enter].
Mailbox No:
4
! Enter a remote fax number and press [Enter].
! The display shows the current time. Enter a start time for the originals to be sent and
press [Enter].
If you set a time earlier than the current time, the job will be sent at that time the
following day.
The originals will be sent to the mailbox at the specified time.