Xerox M20/M20i - Department Codes; Creating Departments

Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 9-15
Machine Administration
Department Codes
Department Codes allow the Administrator to restrict usage and record usage data for
specified departments.
Creating Departments
1
! Press the [Machine Status] key.
Enter Machine
Status
2
! Using the Navigation Keys select
[System Admin Tools] and press
[Enter].
! If the System Admin Tools have
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
! Select [Department] using the
Navigation Keys and press
[Enter].
! Enter the Master Access Code.
#
The first time you access
Department, you will be
prompted to enter a master
access code then re-enter it to
confirm the code.
System Admin Tools
[Department]