Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 2-19
Getting Started
Machine Setup
Use the following instructions to customize your machine to meet your individual
requirements.
! Press [Menu/Exit] to exit each menu level and return to standby mode.
1
! Press the [Machine Status] key.
Enter Machine
Status
2
! Using the Navigation Keys select
[Machine Setup] and press
[Enter].
$ Machine Setup
Fax Setup
3
! Using the Navigation Keys select
the required setup option and
press [Enter].
! Using the “Machine Setup
Options” starting on page 2-20
customize the settings to meet
your requirements.
! Press [Enter] to save your
selections.
Machine Setup
[Tray 1 Size]
4
To Next Page
Loading...
