1.3 <
Introduction>
Rear view
1
control board cover
6
duplex unit
2
network port
7
power receptacle
3
USB port
8
power switch
4
parallel port
9
rear cover
5
optional tray 2 cable
connector
* The figure above shows an Phaser 3428/DN
with all available options.
Control panel overview
1
Stop: Cancel an operation at any time.
2
Back: Sends you back to the upper menu level.
3
Status: Shows the status of your printer. See page 9.6.
4
Menu: Enters Menu mode and arrows through the available
menus.
5
LCD: Displays the printer status, error messages and menus
in progress.
6
Up Arrow button: The option available in the selected menu
increase values.
7
OK: Confirms the selection on the display.
8
Down Arrow button: The option available in the selected
menu decrease values.
To Next Page
Loading...
